Harman Kardon AVR 7000 Auvio/Video Receiver

Open Sunday!

Harman/Kardon AVR 7000 Audio/Video Receiver

Harman/Kardon AVR 7000 Audio/Video Receiver With Dolby Digital, DTS, and HCDC Decoding

Click for Price

Features

High-Current(±75 Amps), ultrawide - bandwidth (10Hz – 115kHz) amplifier design effortlessly powers the most dynamic digital sources.
Dual, matched pairs of discrete output devices for each channel
Massive torroidal power transformer
Dolby® Digital and DTS® surround-sound processing using an advanced Crystal® DSP engine
Harman Kardon's exclusive Logic 7® and VMAx® processing offer realistic surround sound.
VMAx Virtual Surround Sound Provides Home Theater Experience with only two speakers
HCDC Decoding for more realistic reproduction of HCDC compact discs and enhanced playback of non-HCDC discs
Audiophile-Grade, 96kHz/24-bit AKM Output DACs
6-Channel Direct Inputs for Use With External Surround Decoders
FM Stereo/FM/AM Tuner With 30 Presets and Direct-Access Tuning
Three Audio Inputs and Five A/V Inputs, Including S-Video Inputs and Outputs
Advanced On-Screen Menu System for Easy Setup and Operation
Programmable Power-Up Volume Level
Multiroom/Multisource System for Audio and Video
Eight-Device, Programmable, Backlit Universal Remote with Learning Capability

Specifications

Audio Section
Stereo Mode Continuous Average Power (FTC) Per Channel:	110 Watts per channel, 20Hz - 20kHz, @ <0.07% THD, both channels driven into 8 ohms
Five-Channel Surround Modes, Power Per Individual Channel:	Front L&R channels: 100 Watts per channel @ <0.07% THD, 20Hz - 20kHz into 8 ohms Center channel: 100 Watts @ < 0.07% THD, 20Hz - 20kHz into 8 ohms Surround channels: 100 Watts per channel @ <0.07% THD, 20Hz - 20kHz into 8 ohms
High Instantaneous Current Capability (HCC):	±75 Amps
Input Sensitivity/Impedance Linear (High Level):	20mV/47 Ohms
Signal-to-Noise Ratio (IHF-A):	95dB
Surround System Adjacent Channel Separation:	Analog Decoding(Pro Logic, etc.): 40dB Dolby® Digital (AC-3®): 55dB DTS® Mode: 55db
Frequency Response at 1W (+0dB, -3dB):	10Hz - 100kHz
Transient Intermodulation Distortion (TIM):	unmeasureable
Rise Time:	16µsec
Slew Rate:	40V/µsec
FM Tuner Section
Frequency Range:	87.5 - 108MHz
Signal-to-Noise Ratio (Mono):	70dB
Signal-to-Noise Ratio (Stereo):	68dB
Distortion (Mono):	0.2%
Distortion (Stereo):	0.3%
Stereo Separation:	40dB @ 1kHz
Selectivity:	±400kHz, 65dB
Image Rejection:	80dB
IF Rejection:	90dB
Tuner Output Level:	1kHz, ±75kHz Dev 500mV
AM Tuner Section
Frequency Range:	520 - 1710kHz
Signal-to-Noise Ratio (IHF-A):	45dB
Usable Sensitivity:	Loop 500µV
Distortion:	1kHz, 50% Mod 0.8%
Selectivity:	±10kHz, 30dB
Video Section
Video Format:	NTSC
Input Level/Impedance:	1Vp-p/ 75Ohms
Output Level/Impedance:	1Vp-p/75Ohms
Video Frequency Response:	5Hz–10MHz (-3db)
General
Bullet 1:	5 x 100 watts, HCC +/- 75 amps
Width:	17-5/16" (440mm)
Height:	7-5/8" (193mm)
Bullet 2:	Dolby® Digital and DTS® surround
Depth:	20-7/16" (519mm)
Bullet 3:	Four digital inputs and two digital outputs
Bullet 4:	Harman Kardon's VMAx® virtual surround sound
Weight:	49 lb (22.3kg)
Power Requirement:	AC 120V/60Hz
Power Consumption:	125W idle, 1100W maximum (2 channels driven)