|

Open Sunday!








































|
 |


Yamaha HTR-5460 Home
Theater Receiver
Click for Price
The HTR-5460
is a 5-channel receiver providing best performance and processing available for music and
video sound. The 5 channels are: Left/Right Main, Center, Left/Right Rear Effects. This
receiver delivers Dolby Digital and DTS 5.1-channel formats. HTR5460 receiver features
Digital Sound Field Processing, Cinema DSP and Tri-Field Processing, Dolby Surround Pro
Logic processing. The HTR-5460 also provides Silent Cinema and all channel stereo.
- High Performance LSIs And Other
Circuity
Yamaha's single function IC chips (ASICS) are more efficient than multi-function chips and
provide the most accurate decoding possible. Yamaha's YSS-928 chip is a 32-bit ASIC that
provides Dolby Digital, Dolby Pro Logic, DTS, Cinema DSP, Tri-Field Processing. High
density Cinema DSP circuitry is incorporated by utilizing Yamaha's 32-bit YS-928 LSI, two
decoding LSIs, a low impedance drive amplifier featuring superior power transistors, and
gigantic heat sinks.
- Discrete Power Transistors
Discrete power transistors are used in the amplifier section to provide the
cleanest sound possible. The amplifer delivers 100 watts each to five channels.
- 26 Sound Field Modes - Including
70mm Cinema DSP, Tri-Field Processing DSP
Yamaha's Sound Field Processing for music recreates the acoustics of actual concert halls.
35mm and 70mm Cinema DSP multiplies the effects of Dolby Pro Logic and Yamaha DSP to
provide the best possible Pro Logic movie theater recreation in your home.
- Built-In Dolby Digital & DTS
Decoding System
- Tri-Field Processing
Yamaha's Tri-Field Processing applies Digital Sound Field Processing technology to Dolby
Digital and DTS to create a true movie theater experience in the home. It develops
independent enhanced sound fields for the front signals as well as for left and right
surround.
- Dolby Pro Logic
- All-Channel Stereo DSP
Great for casual listening and parties, Yamaha's 5-channel stereo DSP puts music through
all speakers in the system and maintains stereo imaging.
- Virtual Cinema DSP
Provides a realistic multi-channel surround experience using only two speakers.
- Silent Cinema
- 6-Channel Inputs For External
Decoder
The HTR-5460's rear panel has input jacks to accommodate an external 6-channel decoder.
- 96 kHz/24-Bit Compatible
The HTR-5460 is compatible with the 96 kHz/24-bit format of DVD-Audio and will deliver
that best format is possible.
- On-Screen Display
Allows you to easily establish, change, and adjust settings from across the room. The
on-screen display for composite and S-video gives you a visual information of the
receiver's settings on your TV or monitor screen.
- New Remote Control has
preset codes for most manufacturer's products and a subwoofer level control.
- 5 Digital Inputs
With five fully assignable digital inputs (4 optical and 1 coaxial), the HTR-5460 can
accommodate digital sources such as DVD, CD, LD, Cable/Sat, D-TV, and MD.
- 5 Audio/Video & 4 Audio-Only
Inputs
The HTR-5460 receiver incorporates five sets of audio/video inputs and four
audio-only inputs. All the video inputs have RCA jacks and S-video terminals. Includes one
set of A/V inputs on the front panel for fast and easy connection, including a digital
optical jack.
- Component Video Inputs and 30 MHz
bandwidth
The HTR-5460 provides two component video inputs and a full 30 MHz video bandwidth, so the
best possible video image is maintained.
- Low Impedance Drive Capability And
Impedance Switching
Yamaha's famed low impedance drive circuitry is included in this receiver so that it can
handle virtually all loads and a wide variety of speakers. For further speaker matching,
the amplifier can set for either 4- or 8-ohm speakers.
- Linear Damping Factor Circuit
- Bass Extension Control
Accentuates the bass by adding a 7 dB boost at around 70 Hz.
- A/B Speaker Selector
- Sleep Timer -- Allow to set
it for up to two hours in 30 minute increments.
- 4-Station Direct Access Preset
Tuning
Up to 40 preset AM and FM stations can be grouped in five groups eight stations. These
groupings make it easy for family members to easily access their favorite stations or to
have musical genres, such as all the jazz stations, grouped together.
- Binding Post Speaker Terminals
Yamaha's heavy-duty binding post speaker terminals accept banana plugs, spade connectors,
and a variety of speaker wire, including heavy gauge cable.
Specifications
| Audio
Section |
|
| Minimum
RMS Output Power per Channel |
MAIN,
20Hz-20kHz, 0.06% THD, 8 ohms - 100W + 100W
CENTER, 20Hz-20kHz, 0.06% THD, 8 ohms - 100W
REAR, 20Hz-20kHz, 0.06% THD, 8 ohms - 100W + 100W |
| Minimum
RMS Output Power per Channel |
MAIN, 1kHz,
0.09% THD, 8 ohms - 110W + 110W
CENTER, 1kHz, 0.09% THD, 8 ohms - 110W
REAR, 1kHz, 0.09% THD, 8 ohms - 110W + 110W |
| Dynamic
Power per Channel |
MAIN,
8/6/4/2 ohms - 130/150/190/240W |
| Dynamic
Headroom |
8 ohms -
1.3dB |
| Damping
Factor |
MAIN L/R,
20Hz-20kHz, 8 ohms - 80 or more |
| Input
Sensitivity/Impedance |
PHONO MM -
2.5mV/47k ohms
CD, etc - 150mV/47k ohms |
| Maximum
Input Signal Level |
PHONO MM,
1kHz, 0.05% THD, (Effect on) - 100mV
CD, etc (Effect on) - 2.2V |
| Output
Level/Impedance |
REC OUT -
150mV/900 ohms
SUBWOOFER (EFFECT OFF, MAIN SP:SMALL)
MONO - 4.0V/1.2k ohms |
| Headphone
Jack Rated Output/Impedance |
CD, etc -
400mV/560 ohms |
| Frequency
Response (10Hz-100kHz) |
CD, etc,
MAIN L/R - +0/-3.0dB |
| RIAA
Equalizaton Deviation (20Hz-20kHz) |
PHONO MM -
0 +/-0.5dB |
| Tone
Control Characteristics |
|
| Bass |
Boost/Cut -
+/-10dB (50Hz) |
| Treble |
Boost/Cut -
+/-10dB (20kHz) |
| Bass
Extension |
+6dB (60Hz) |
| Filter
Characteristics |
SUBWOOFER
OUT: LPF - fc=90Hz, 18dB/oct
MAIN, CENTER, REAR SP SMALL: HPF - fc=90Hz, 12dB/oct |
| Total
Harmonic Distortion (20Hz-20kHz) |
PHONO MM to
REC OUT (1V) - 0.02%
CD, etc, to MAIN SP OUT L/R (45 Watts, 8 ohms) - 0.04% |
| Signal-to-Noise
Ratio (IHF-A-Network) |
CD, etc,
Input Shorted (Effect off) - 100dB |
| Residual
Noise (IHF-A-Network) |
MAIN, SP
OUT - 150uV |
| Channel
Separation (Vol. -30dB, Effect off) |
CD, etc,
Input 5.1k ohms Shorted, 1kHz - 60dB |
| Muting |
- infinity |
| Video
Section |
|
| Video
Signal type |
NTSC |
| Composite
Video Signal Level |
1Vp-p/75
ohms |
| S Video
Signal Level |
Y -
1Vp-p/75 ohms
C - 0.286Vp-p/75 ohms |
| Component
Signal Level |
Y -
1Vp-p/75 ohms
Cb/Cr - 0.7V/75 ohms |
| Video
Maximum Input Level |
1.5Vp-p |
| Video
Signal-to-Noise Ratio |
50dB |
| Monitor
Output Frequency Response |
Composite
Video Signal - 5Hz-10MHz, -3dB
S-Video Signal - 5Hz-10MHz, -3dB
Component Signal - DC-30MHz, -3dB |
| Tuner
Section (FM) |
|
| Tuning
Range |
87.5 to
107.9MHz |
| 50dB
Quieting Sensitivity (IHF, 75 ohms) |
Mono (1kHz,
100% Mod) - 1.6uV (15.3dBf)
Stereo (1kHz, 100% Mod) - 23uV (38.5dBf) |
| Selectivity
(400kHz) |
75dB |
| Signal-to-Noise
Ratio |
Mono/Stereo
(IHF) - 81/75dB |
| Harmonic
Distortion |
Mono/Stereo
(1kHz) - 0.1./0.2% |
| Stereo
Separation |
1kHz - 48dB |
| Frequency
Response |
20Hz-15kHz
- +/-1.0dB |
| Antenna
Input |
75 ohms
unbalanced |
| Tuner
Section (AM) |
|
| Tuning
Range |
530 to
1,710kHz |
| Usable
Sensitivity |
300uV/m |
| Output
Level |
AM 30% Mod.
1kHz - 150mV |
| Signal-to-Noise
Ratio |
52dB |
| Antenna |
Loop
Antenna |
| Dimensions |
W x H x D =
18" x 9.25" x 20.5" |
| Weight |
29.75 lbs. |

[ Home | Audio
| AV
Accessories | Binoculars
| Camcorders | Cameras ]
[ Capture Cards | Digital Cameras | DVD | Electric
Shavers | GPS | Maglite
]
[ PAL | Presentation
| Remote
Controls | Telecommunications
| Tools ]
[ TV | TV/VCR Combo | Two
Way Radios | VCR | Video Editing ]
[ 220
Volt Products | Barbeque
| Car | Furniture-Stands
]
[ Game
Accessories | Home
Office | Observation
| Small Appliances ]
[ TDK
Store | Gift
Certificate | Specials
| Order Info | Contact Us ]
[ Technical Support | Newsletter | Search ]
|