Canon Elph 2 APS Camera

Supreme Video + Electronics

Canon Elph 2 APS Camera

Features

Specifications

GENERAL

Type: IX 240 AF fully automatic lens shutter camera with built-in zoom lens and magnetic IX functions.
Print Aspect Ratio: 16.7 x 30.2mm. Trimmed to H, C or P size when printed. H size: 15.6 x 27.4mm, C size: 15.6 x 22.3mm, P size: 9.6 x 27.4mm.
Lens: 23-46mm f/4.2-5.6, 6 elements in 6 groups (with 2 aspherical glass lenses).
Viewfinder: Real-image zoom finder covers approx. 86% of actual picture area. 0.33x magnification in WIDE; 0.66 x magnification in TELE.
Viewfinder Information: Object lens frame, Close-up frame, AF frame, Standard size mask (C size), Panorama size mask (P size) inside viewfinder area. Red "OK-to-shoot" and orange "camera shake warning/flash ready" LED indicators outside viewfinder eyepiece.
Shutter: Combination aperture and program electromagnetic drive shutter.

AUTOFOCUS

Passive and active autofocus using 1/RED skimming CCD sensor as a distance-measuring element.
AF Mode: Single point measurement only.
Focusing Range: 1.5ft./0.45m to infinity, 108 focusing zones, at telephoto setting.

EXPOSURE CONTROL

AE Control: Program AE; AE lock upon AF completion; 2 zone measurement with SPC light sensing elements.
Metering Range: (at ISO 100) Flash On/Flash Auto: WIDE- EV10.1-EV18 (1/60 sec at f/4.2 to 1/800 sec at f/18); TELE- EV11.5-EV20 (1/90 sec at f/5.6 to 1/900 sec at f/34);
Flash Off/Slow Sync: WIDE- EV3.1-EV18 (2 sec at f/5.6 to 1/900 sec at f/34).

FILM HANDLING

Film Speed Setting: ISO 20-10,000 automatically set in 1/3-step increments by reading data disk.
Cartridge Film Loading/Advance/Rewind: Manual drop-in loading. Fully automatic advance and Rewind. Mid-Roll Change possible.
Mid-Roll Change: A partially-exposed roll of APS film can be rewound by pressing the "MRC" button, removed and replaced with another roll. The partially-exposed roll can later be put back into the ELPH2, and will automatically wind to the first unexposed frame.
IX: Date, Print Aspect Ratio, Cartridge loading direction, Strobe On/Off, Subject brightness, Title, Magnification, Artificial Lighting, Flash Exposure, Lighting conditions (front/back) and print quantity are recorded on film using a single-track, write-on magnetic recording head.

FLASH

Type: Built-in strobe flash unit operates automatically in dim or backlit conditions.
Exposure Control: Determined by film speed and AF distance.
Red-Eye Reduction Mode: Activated via Auto flash button.
Flash Recycling Time: Approximately 6 sec. (with flash battery).
Flash Coupling Range (ISO 200) WIDE: 1.5ft-13.8ft; TELE: 1.5ft-10.2ft.

OTHER

Self-timer: Electronically controlled with 10 seconds delay.
Optional Remote Controller (RC-5): Infrared, 2 seconds delay shutter release. Transmits up to 16.4ft/5.3m when directly in front, up to 11.5ft/3.5m at periphery.
Date Imprint: Recorded magnetically, and can be printed on either the front and back or only the back of print. Automatic up to 2029. Powered by camera battery.
Custom Functions: 3 available. (CF-1) Real-time shutter release (0, off, 1: on), (CF-2) Flash mode preserved when camera turned off (0: only auto modes preserved, 1: any flash mode preserved), (CF-3) Auto Film Rewind (0: film rewinds automatically at end of roll, 1: user must press rewind button at roll end to rewind)

POWER SOURCE

DIMENSIONS